
АПСДК Type
АПСДК Type – is round or rectangular aluminum conductor insulated with glass fibers dual imposed, with the gluing and impregnation with organic silicon lacquer.
Core diameter for round conductors: from 1.80 to 3.00 mm.
Core dimensions for rectangular conductors, mm: from 1,80×3,35 to 5,60×14,0 mm.
Temperature index: 200.
Application: conductors are used for manufacture of windings of electric machines, gears and devices.
АПСДКТ Type
АПСДКТ Type – is the same as АПСДК type, but with thinned insulation.
ПСДК-Л Type
ПСДК-Л Type – is round or rectangular copper conductor insulated with glass fibers dual imposed, with the gluing and impregnation with organic silicon lacquer, with lacquered surface.
Core diameter for round conductors: from 1.50 to 5.20 mm.
Core dimensions for rectangular conductors, mm: from 1,00×2,12 to 5,60×12,5 mm.
Temperature index: 200.
Application: conductors are used for manufacture of windings of electric machines, gears and devices.
ПСДКТ Type
ПСДКТ Type – is round or rectangular copper conductor with insulation from glass fibers dual imposed, with the gluing and impregnation with organic silicon lacquer.
Core diameter for round conductors: from 1,50 to 5,20 mm.
Core dimensions for rectangular conductors, mm: from 1,00×2,12 to 5,60×12,5 mm.
Temperature index: 200.
Application: conductors are used for manufacture of windings of electric machines, gears and devices.
ПСДКТ-Л Type
ПСДКТ-Л Type – is the same as ПСДКТ type but with lacquered surface.
Application: conductors are used for manufacture of windings of electric machines, gears and devices.

ПЭТВСД Type
ПЭТВСД Type – is copper conductor insulated with heat-resistant high-strength enamel and with two layers of winding from glass fibers impregnated with heat-resistant lacquer.
Core dimensions for rectangular conductors, mm: from 0,90×2,00 to 3,55×9,00 mm.
Temperature index: 155.
Application: conductors are used for manufacture of windings of electric machines.
ПЭТВСДТ Type
ПЭТВСДТ Type – is copper conductor with thinned insulation insulated with heat-resistant high-strength enamel and with two layers of winding from glass fibers impregnated with heat-resistant lacquer.
Core dimensions for conductors, mm: from 0,90×2,00 to 3,55×9,00 mm.
Temperature index: 155.
Application: conductors are used for manufacture of windings of electric machines.

ПЭНСД Type
ПЭНСД Type – is copper rectangular conductor insulated with high-strength enamel of enhanced heat resistance and with two layers of winding from glass fibers impregnated with organic silicon lacquer.
Nominal wires dimensions:
- Thickness: from 0.80 to 3.55 mm;
- Width: from 2.00 to 10.00 mm.
ПСНСД Type
ПСНСД Type – is copper round or rectangular conductor single insulated by tape from synthetic aramid paper NOMEX with two layers of winding from glass fibers impregnated with a gluing and silicone lacquer.
Nominal wires diameter: from 1.80 to 5.00 mm.
Nominal wires dimensions:
- Thickness: from 0.80 to 3.55 mm;
- Width:from 2.00 to 10.00 mm.
ППНСД Type
ППНСД Type – is copper round or rectangular conductor single insulated by tape from synthetic aramid paper NOMEX with two layers of winding from glass fibers impregnated with a gluing and silicone lacquer.
Nominal wires diameter: from 1.80 to 5.00 mm.
Nominal wires dimensions:
- Thickness: from 0.80 to 3.55 mm;
- Width: from 2.00 to 10.00 mm.
ППДНС Type
ППДНС Type – is copper rectangular conductors dual insulated by tapes with PTFE-coated polyimide film with single layer of winding from glass fibers impregnated with a gluing and silicone lacquer.
Nominal wires dimensions:
- Thickness: from 2.12 to 4.50 mm;
- Width: from 4.00 to 10.00 mm.
Application: conductors are used for manufacture of windings of electric machines. Conductors on heat resistance of insulation belong to the class 200 (200º C) in accordance with GOST 8865.